Alsecure Plus Multicore 300/500 V 12G1,5
Country ref. 0110055
StandardsNational : NF C 32-310
Alsecure Plus Multicores is a halogen free, flame retardant, non-screened control cable with circular, solid copper conductors. The cable is designed according to NF C32-310. The conductors have resistance and number of wires according to IEC 60228 class 1. The insulation is of silicon rubber and the cores are identified by numbers according to HD 308. Alsecure Plus Multicores meets the requirements for flammability IEC 60332-3 category B and emits no corrosive gases when burning and has low smoke production. The cable is fire resistant according to IEC 60331.
ALSECURE PLUS Multicore cables will be installed to the wiring regulation and installation standards in force.
Laying temperature: in case of laying below 0°C, warm up the cable in a heated room 48 hours minimum before installation.
ALSECURE PLUS Multicore cables are not designed for buried installation.
This cable is tested and certified by UTE.
The cables are tested and approved according to several national and international standards.
- Fire resistant according to IEC 60331, BBR 94 class El90, NF C 32-070 Cat. CR1, EN 50200, NBN C 30-004 F2 FR2 PH60, BS 6387 cat CWZ
- Fire retardant according to IEC 60332 Part 2 & 1, SS 424 14 75 min class F4, NF C 32-070 Cat. C1 & C2, EN 50266, NBN C 30-004 F2
- Low smoke : IEC 61034, NF C 32-073, EN 50268
- Halogen free : IEC 60754, NF C 32-074, EN 50267
Quality and environmental management system
Certified according to ISO 9001, IRIS, ISO/TS 16949 and ISO 14001.
ALSECURE PLUS n (G or x) S mm² 300 V NF C 32-310 CR1/C1 NF-USE 205 F2 FR2 60
n = number of cores
G = with Green/Yellow
x = without Green/Yellow
S = section in mm²
|Conductor shape||Round, massive|
|Outer sheath||HFFR (polyolefin)|
|Number of cores||12|
|Nominal outer diameter||16.5mm|
|Maximum outer diameter||19.5mm|
|Rated Voltage Uo/U (Um)||300 / 500 V|
|Max. DC resistance of the conductor at 20°C||12.1Ohm/km|
|Operating temperature, range||-10 .. 60°C|
|Recommended minimum installation temperature||0°C|
|Maximum operating temperature||90°C|
|Short-circuit max. conductor temperature||250°C|
|Bending factor when laying||6(xD)|
|Flame retardant||IEC 60332-3 Cat. B|
|Bending factor when installed||6(xD)|